Planking, with the chines glued in and beveled it was time to get some of the planking stock on the boat. This happened in one day getting the topsides and bow plates on.  Again removing any squeeze out from the inside of the boat. this took a fair amount of time.  To this point it was time to move the boat and head down to warmer weather for a few months. 



 

Comments

Post a Comment

Popular posts from this blog

Image
More planking stock going on, a quick fair of the chines and some fiberglass tape added to keep water out as the boat is to  move again.   
Read more

Assembling Station and Frames

Image
  Next came organizing and cleaning up parts to start assembling frames. Everything was held in place with Cauls and clamps.  West system used throughout. When working with epoxy I wet out the pieces twice and let it really soak into the grain.
Read more

Milling Parts on CNC

Image
 Aug 25, 2020 Final cuts being made for enough parts to get me going.  Mostly all the frame stock and i would pick up the Planking at a later date.  Material used from the frame parts was native maine spruce.  Ordered the CNC file cutting kit and i had the kit cut out locally here in Scarborough ME.  Getting the rights to use the file one time only was an extra cost that I believe is not available at this time.  August 29, 2020   Once I had all the parts in the shop the actual building could begin. 
Read more